Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Star Stable Online - CSA & TGA files
Re: Star Stable Online - CSA & TGA files
.
Last edited by dpu8xhys on Sun Sep 04, 2022 3:24 pm, edited 3 times in total.
- some1hippiebullshit
- ultra-n00b
- Posts: 9
- Joined: Wed Nov 03, 2021 11:38 pm
- Been thanked: 1 time
Re: Star Stable Online - CSA & TGA files
In the same way as for .tga files but with this .bms file; https://drive.google.com/drive/folders/ ... sp=sharingdpu8xhys wrote: ↑Thu Nov 04, 2021 2:29 amsome1hippiebullshit wrote: ↑Wed Nov 03, 2021 11:41 pm Hi! I have been following this forum for a while now and I would like to open the 3D models on Blender. But I can't do it. When I convert the .pme files to .obj using 3DObjectConverter and open the converted file in blender, the model does not display. Can someone help me and tell me how to convert?
Thanks
As you can see there are a lot of unanswered questions, if there was a solution we would all be on it already ^^
But by the way, how did you get your .pme files? I only have .tga and .ptf files
You will have all the files of the game except the .tga files which require another .bms file
- kapibarcia
- beginner
- Posts: 28
- Joined: Fri Sep 25, 2020 4:28 pm
- Location: Poland
- Has thanked: 7 times
- Been thanked: 5 times
- Contact:
Re: Star Stable Online - CSA & TGA files
Are you sure the model doesn't display? For me it display but it's very small, so you have to zoom in or change size of the model.some1hippiebullshit wrote: ↑Wed Nov 03, 2021 11:41 pm Hi! I have been following this forum for a while now and I would like to open the 3D models on Blender. But I can't do it. When I convert the .pme files to .obj using 3DObjectConverter and open the converted file in blender, the model does not display. Can someone help me and tell me how to convert?
Thanks
zla kapibara!!!!#8536
- some1hippiebullshit
- ultra-n00b
- Posts: 9
- Joined: Wed Nov 03, 2021 11:38 pm
- Been thanked: 1 time
Re: Star Stable Online - CSA & TGA files
Yes, it doesn't displaykapibarcia wrote: ↑Wed Nov 10, 2021 4:47 pmAre you sure the model doesn't display? For me it display but it's very small, so you have to zoom in or change size of the model.some1hippiebullshit wrote: ↑Wed Nov 03, 2021 11:41 pm Hi! I have been following this forum for a while now and I would like to open the 3D models on Blender. But I can't do it. When I convert the .pme files to .obj using 3DObjectConverter and open the converted file in blender, the model does not display. Can someone help me and tell me how to convert?
Thanks
How do you do the conversion? To avoid polluting this forum too much, you can answer me on discord if you want
Mishka#2314
Re: Star Stable Online - CSA & TGA files
This is probably because you used an older BMS script. As for me I have followed different forums and such and there was a ascript that extracted .tga files for you. I can't rememeber but someone named Lisa (or sso ghosty) rewrote the script and shared it with us. With that script you can get .pte, .pme etc. files.hzzslg wrote: ↑Tue Aug 31, 2021 2:11 am Hi!
I'm not very good at all of this, to tell the truth I only do it for 3D models and textures ...
I have decompressed the .csa files but I don't have any .tga files. Could someone help me?
Thanks
https://cdn.discordapp.com/attachments/ ... 5_Trim.mp4
Re: Star Stable Online - CSA & TGA files
Also Samyy, can you send me a pm with these files so I can try these too? The drive seems to be locked.Samyy360 wrote: ↑Thu Sep 09, 2021 6:03 pm I want to test something, when your sso has finished updating, still on the home page, go to C:\Program Files (x86)\Star Stable Online\client\PackFiles
and put these files, replacing the files.
when you click "play" within the game, look for a black starter horse, see if it has a different texture.
- some1hippiebullshit
- ultra-n00b
- Posts: 9
- Joined: Wed Nov 03, 2021 11:38 pm
- Been thanked: 1 time
Re: Star Stable Online - CSA & TGA files
the only .bms I find on this forum is for textures and not for 3D models... I don't know where I found the .bms for .pme, .pte, ...catianna wrote: ↑Sat Nov 27, 2021 6:52 pmThis is probably because you used an older BMS script. As for me I have followed different forums and such and there was a ascript that extracted .tga files for you. I can't rememeber but someone named Lisa (or sso ghosty) rewrote the script and shared it with us. With that script you can get .pte, .pme etc. files.hzzslg wrote: ↑Tue Aug 31, 2021 2:11 am Hi!
I'm not very good at all of this, to tell the truth I only do it for 3D models and textures ...
I have decompressed the .csa files but I don't have any .tga files. Could someone help me?
Thanks
https://cdn.discordapp.com/attachments/ ... 5_Trim.mp4
- kapibarcia
- beginner
- Posts: 28
- Joined: Fri Sep 25, 2020 4:28 pm
- Location: Poland
- Has thanked: 7 times
- Been thanked: 5 times
- Contact:
Re: Star Stable Online - CSA & TGA files
.pme files are the model files. You need to convert them in 3D Object Converter if you want to open them in Blender.some1hippiebullshit wrote: ↑Sun Nov 28, 2021 12:05 amthe only .bms I find on this forum is for textures and not for 3D models... I don't know where I found the .bms for .pme, .pte, ...catianna wrote: ↑Sat Nov 27, 2021 6:52 pmThis is probably because you used an older BMS script. As for me I have followed different forums and such and there was a ascript that extracted .tga files for you. I can't rememeber but someone named Lisa (or sso ghosty) rewrote the script and shared it with us. With that script you can get .pte, .pme etc. files.hzzslg wrote: ↑Tue Aug 31, 2021 2:11 am Hi!
I'm not very good at all of this, to tell the truth I only do it for 3D models and textures ...
I have decompressed the .csa files but I don't have any .tga files. Could someone help me?
Thanks
https://cdn.discordapp.com/attachments/ ... 5_Trim.mp4
zla kapibara!!!!#8536
Re: Star Stable Online - CSA & TGA files
https://drive.google.com/file/d/16f9qMS ... hLpRn/viewsome1hippiebullshit wrote: ↑Sun Nov 28, 2021 12:05 amthe only .bms I find on this forum is for textures and not for 3D models... I don't know where I found the .bms for .pme, .pte, ...catianna wrote: ↑Sat Nov 27, 2021 6:52 pmThis is probably because you used an older BMS script. As for me I have followed different forums and such and there was a ascript that extracted .tga files for you. I can't rememeber but someone named Lisa (or sso ghosty) rewrote the script and shared it with us. With that script you can get .pte, .pme etc. files.hzzslg wrote: ↑Tue Aug 31, 2021 2:11 am Hi!
I'm not very good at all of this, to tell the truth I only do it for 3D models and textures ...
I have decompressed the .csa files but I don't have any .tga files. Could someone help me?
Thanks
https://cdn.discordapp.com/attachments/ ... 5_Trim.mp4
Re: Star Stable Online - CSA & TGA files
Yes, that's what we know already, the problem still remains within the texture compression/decompression.kapibarcia wrote: ↑Sun Nov 28, 2021 2:47 pm.pme files are the model files. You need to convert them in 3D Object Converter if you want to open them in Blender.some1hippiebullshit wrote: ↑Sun Nov 28, 2021 12:05 amthe only .bms I find on this forum is for textures and not for 3D models... I don't know where I found the .bms for .pme, .pte, ...catianna wrote: ↑Sat Nov 27, 2021 6:52 pm
This is probably because you used an older BMS script. As for me I have followed different forums and such and there was a ascript that extracted .tga files for you. I can't rememeber but someone named Lisa (or sso ghosty) rewrote the script and shared it with us. With that script you can get .pte, .pme etc. files.
- kapibarcia
- beginner
- Posts: 28
- Joined: Fri Sep 25, 2020 4:28 pm
- Location: Poland
- Has thanked: 7 times
- Been thanked: 5 times
- Contact:
Re: Star Stable Online - CSA & TGA files
I know. I replied to @some1hippiebullshit comment, because she had problem with 3d models. I thought she didn't know that .pme files are the 3d model files.catianna wrote: ↑Mon Nov 29, 2021 12:26 amYes, that's what we know already, the problem still remains within the texture compression/decompression.kapibarcia wrote: ↑Sun Nov 28, 2021 2:47 pm.pme files are the model files. You need to convert them in 3D Object Converter if you want to open them in Blender.some1hippiebullshit wrote: ↑Sun Nov 28, 2021 12:05 am
the only .bms I find on this forum is for textures and not for 3D models... I don't know where I found the .bms for .pme, .pte, ...
zla kapibara!!!!#8536
-
- advanced
- Posts: 43
- Joined: Sun Jan 10, 2021 6:46 pm
- Has thanked: 3 times
- Been thanked: 6 times
Re: Star Stable Online - CSA & TGA files
what is that for?dpu8xhys wrote: ↑Tue Nov 02, 2021 5:23 am Hi everyone,
After multiple researches for the pixelated picture, I think that except to put itself to the programming one will not have the solution so easily. So I went back to the Texgenpack.exe program. It was created in 2016 and a year ago, a post about its functionality was posted :
https://www.nexusmods.com/newvegas/mods ... escription
So that shows you the way to set it up but my problem with it is that I have an "R6034" error that I'm having trouble rectifying. Here's a little hint, I hope you haven't given up.
- kapibarcia
- beginner
- Posts: 28
- Joined: Fri Sep 25, 2020 4:28 pm
- Location: Poland
- Has thanked: 7 times
- Been thanked: 5 times
- Contact:
Re: Star Stable Online - CSA & TGA files
It's something like Crunch. It's for decompressing, compressing and converting texture files using a genetic algorithm. Btw, the github page says that it was mainly developed for Linux. It contains a Windows port, but it "requires some configuration to provide pthreads and GTK+ for GUI". If someone has time you can create a virtual machine with Linux and try to use texgenpack.Samyy360 wrote: ↑Fri Dec 17, 2021 11:33 pmwhat is that for?dpu8xhys wrote: ↑Tue Nov 02, 2021 5:23 am Hi everyone,
After multiple researches for the pixelated picture, I think that except to put itself to the programming one will not have the solution so easily. So I went back to the Texgenpack.exe program. It was created in 2016 and a year ago, a post about its functionality was posted :
https://www.nexusmods.com/newvegas/mods ... escription
So that shows you the way to set it up but my problem with it is that I have an "R6034" error that I'm having trouble rectifying. Here's a little hint, I hope you haven't given up.
zla kapibara!!!!#8536
- kapibarcia
- beginner
- Posts: 28
- Joined: Fri Sep 25, 2020 4:28 pm
- Location: Poland
- Has thanked: 7 times
- Been thanked: 5 times
- Contact:
Re: Star Stable Online - CSA & TGA files
For modeling and animating they use Maya and for textures I think they use photoshop, but I'm not sure about that
zla kapibara!!!!#8536