Done! Can you test it? You will have to replace the "magic" variable in unpakke.ini with "d9ef88157bcbcae0"hyndai wrote:hi, can you updated vis3 again for french version there are a new key :
"d9ef88157bcbcae0" # Deponia french - publish by aluigi
ThX
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
XpoZed's Unpakke project
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
-
- advanced
- Posts: 58
- Joined: Tue Jun 03, 2008 9:55 pm
- Has thanked: 4 times
- Been thanked: 1 time
Re: XpoZed's Unpakke project
Hi just tested in french release, and no works with key d9ef88157bcbcae0, unpack 0 bytes, because not full md5 ( if i compare with other keys ), and i don't no know how search xor key...
sample of data.vis french (121ko)
https://rapidshare.com/files/4217231988/data-sample.vis
alugui - bmls vis3
http://aluigi.org/papers/bms/visionaire.bms
sample of data.vis french (121ko)
https://rapidshare.com/files/4217231988/data-sample.vis
alugui - bmls vis3
http://aluigi.org/papers/bms/visionaire.bms
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
Open unpakke.ini and set the "magic" value to "d9ef88157bcbcae0d9ef88157bcbcae0" instead of "d9ef88157bcbcae0"hyndai wrote:Hi just tested in french release, and no works with key d9ef88157bcbcae0, unpack 0 bytes, because not full md5 ( if i compare with other keys ), and i don't no know how search xor key...
sample of data.vis french (121ko)
https://rapidshare.com/files/4217231988/data-sample.vis
alugui - bmls vis3
http://aluigi.org/papers/bms/visionaire.bms
Re: XpoZed's Unpakke project
Hi, i have big problem with Unpakke prog. I have two versions of A new beginning game - ENG and GER game and when i use unpakke old version, then after unpack/pack (without changes in xml), output file is smaller and game wont run. When i use newest version of unpakke, then when i try to unpack vis files, then UNKNOWN version appears and files have 0bytes. Same problem is with game Harveys neue augen. Please help me.
http://www.ulozto.cz/x625FUf/pack-zip This link contains Eng data.vis, Ger data.vis, old unpakke, newest unpakke for A new beginning.
http://www.ulozto.cz/xvXhS6S/te-zip This link contains Ger data.vis file for Harveys neue augen
thank you
http://www.ulozto.cz/x625FUf/pack-zip This link contains Eng data.vis, Ger data.vis, old unpakke, newest unpakke for A new beginning.
http://www.ulozto.cz/xvXhS6S/te-zip This link contains Ger data.vis file for Harveys neue augen
thank you
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
Download the latest VIS3 module that includes "unpakke.ini"strizek wrote:Hi, i have big problem with Unpakke prog. I have two versions of A new beginning game - ENG and GER game and when i use unpakke old version, then after unpack/pack (without changes in xml), output file is smaller and game wont run. When i use newest version of unpakke, then when i try to unpack vis files, then UNKNOWN version appears and files have 0bytes. Same problem is with game Harveys neue augen. Please help me.
http://www.ulozto.cz/x625FUf/pack-zip This link contains Eng data.vis, Ger data.vis, old unpakke, newest unpakke for A new beginning.
http://www.ulozto.cz/xvXhS6S/te-zip This link contains Ger data.vis file for Harveys neue augen
thank you
Open "unpakke.ini" and check the "magic" value. There is a list of magic codes for all the supported games in the file. Take the "A new beginning" hash and replace the magic value with it.
Now try to unpack the files again and they should have no problems (I've already tried ).
Re: XpoZed's Unpakke project
Hello again. No success. Still unknown file and then 0byte file.
i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.
Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.
Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.strizek wrote:Hello again. No success. Still unknown file and then 0byte file.
i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.
Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Then use:
Code: Select all
unpakke upkk_vis3.dll unpack data.vis scene
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
Read this: http://www.nullsecurity.org/article/a_n ... png_fixingh1210591 wrote:Hello,
I successfully unpacked files from data.vis and I got many .ogg and .png files. Ogg files works great, but I cannot open or edit png files. Any suggestion?
Thx
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
The link i give you about fixing the png's is just an solution example. If you need to fix all the PNG's at once, you have to implement your own tool, using my technique. As much as i remember there was a tool already from some guy on the forums here, and was written for the game "A new beginning". However i think it might work without any problem for "Deponia" and other games using VIS3.h1210591 wrote:I have problem with compile the code. And is there any faster solution than passing through the pictures one by one? And one more question - Where are the actual texts to translate? In these png files?XpoZed wrote:Read this: http://www.nullsecurity.org/article/a_n ... png_fixingh1210591 wrote:Hello,
I successfully unpacked files from data.vis and I got many .ogg and .png files. Ogg files works great, but I cannot open or edit png files. Any suggestion?
Thx
Thx
The text strings are located in the only one .XML file stored in data.vis (the largest file there, should be around 40-50MBs)
Re: XpoZed's Unpakke project
i newly downloaded latest version, as you described - no success, still same problem. Could you please upload somewhere to server working combination of unpakke with right dll files ? I want to check your package.XpoZed wrote:Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.strizek wrote:Hello again. No success. Still unknown file and then 0byte file.
i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.
Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Then use:I try it myself and it did work for both files (German and English version).Code: Select all
unpakke upkk_vis3.dll unpack data.vis scene
Thank you
- XpoZed
- veteran
- Posts: 144
- Joined: Sat Oct 24, 2009 5:08 pm
- Location: Bulgaria
- Has thanked: 2 times
- Been thanked: 50 times
- Contact:
Re: XpoZed's Unpakke project
I told you I've used unpakke and upkk_vis3.dll downloaded from the site. Make sure you have the right unpakke.ini in your unpakke directory, and the magic value is the correct one.strizek wrote:i newly downloaded latest version, as you described - no success, still same problem. Could you please upload somewhere to server working combination of unpakke with right dll files ? I want to check your package.XpoZed wrote:Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.strizek wrote:Hello again. No success. Still unknown file and then 0byte file.
i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.
Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Then use:I try it myself and it did work for both files (German and English version).Code: Select all
unpakke upkk_vis3.dll unpack data.vis scene
Thank you
Re: XpoZed's Unpakke project
How can I use it?Moo wrote:Key for Edna & Harvey: Harvey's New Eyes demo (English/Steam) = 00148ff19c9a5fc400148ff19c9a5fc4
May be same for full game.