Prefab file : http://www.mediafire.com/file/gjmexy5h0 ... refab/file
I am trying to fix the compile and it looks like it is faulty or has some problem.
If possible, can you pre-patch the code into the Make_obj software? I think it will work once you have pre-patched it and gave it to me ("Maybe it won't work"), but I hope you can help me with that! Thanks.
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Kamen Rider City Wars Ripped
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
Thanks!
Could you be more specific, please? There should be no problem compiling the patched code when you just replace the old function void SM_of_KR_CW_loop() by the patched one.I am trying to fix the compile and it looks like it is faulty or has some problem.
btw: I used the compiled exe as of Sept. 14 th, 2019 ("one SM only"-version) and it produces the same Makeobj_log.obj as the one you uploaded.
May take some time. Your prefab "breaks" the patched code.If possible, can you pre-patch the code into the Make_obj software?
Maybe it doesn't have a 2nd submesh? The max vertex count might be 65404, while without the patch we get 28225 vertices only.
(Cool, that you engage in this (KR) 2nd submesh problem, there's only few people who did.)
-----------------------------------
well, from a rough check:
vertices 0x643574, count: 28225
0x86498 trans/rotmat?
0x86A10 DWord strlen, ... TransformRotationEulerLinker, 4490 times!
0x513223..565d2e, 28225 normals
0x565d89..5d4199, Tangents 28225 stride 16
block size 0x52b0c
0x5d41f4..626d00 binormals 28225
I'd conclude: there's no 2nd submesh. There's one mesh/ 2 objects: npc and animal
Dunno where this face index 65404 comes from. Maybe check that later ...
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
If you have any news please let me know, I look forward to a lot of you in this help.shakotay2 wrote: ↑Wed Feb 10, 2021 11:19 amThanks!Could you be more specific, please? There should be no problem compiling the patched code when you just replace the old function void SM_of_KR_CW_loop() by the patched one.I am trying to fix the compile and it looks like it is faulty or has some problem.
btw: I used the compiled exe as of Sept. 14 th, 2019 ("one SM only"-version) and it produces the same Makeobj_log.obj as the one you uploaded.
May take some time. Your prefab "breaks" the patched code.If possible, can you pre-patch the code into the Make_obj software?
Maybe it doesn't have a 2nd submesh? The max vertex count might be 65404, while without the patch we get 28225 vertices only.
(Cool, that you engage in this (KR) 2nd submesh problem, there's only few people who did.)
-----------------------------------
well, from a rough check:
vertices 0x643574, count: 28225
0x86498 trans/rotmat?
0x86A10 DWord strlen, ... TransformRotationEulerLinker, 4490 times!
0x513223..565d2e, 28225 normals
0x565d89..5d4199, Tangents 28225 stride 16
block size 0x52b0c
0x5d41f4..626d00 binormals 28225
I'd conclude: there's no 2nd submesh. There's one mesh/ 2 objects: npc and animal
Dunno where this face index 65404 comes from. Maybe check that later ...
The 2nd Submesh I have patched on but it still has problems not splitting (This is because of me or my computer can not compile). I also find it strange that some people completely got it without the same problem as me. Thanks
Noob with Questions
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
The news is in my previous post. There won't be any other as long I don't have exact information about existing problems.WhiteVN606 wrote: ↑Thu Feb 11, 2021 2:12 am If you have any news please let me know, I look forward to a lot of you in this help.
Can you compile the unpatched source?The 2nd Submesh I have patched on but it still has problems not splitting (This is because of me or my computer can not compile).
Which model are you talking about? For MDL__B00092_92.prefab (which is the only two-mesh-model I could test) it works:I also find it strange that some people completely got it without the same problem as me. Thanks
.
btw: if people are asking themselves why I don't simply upload the compiled exe:
it doesn't make sense because it's tested with the above two-mesh-model only.
As long as I don't have other two_or_more mesh models I can't proceed.
You do not have the required permissions to view the files attached to this post.
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
Hey, can you help me? This Prefab file, when put into Make_Obj, there was one missing thing when outputting obj file. I do it again and again so I check the File size, the Prefab File is about 6MB, but the file output is 1.5MB, "Pet" is missing. Can you help me transfer it to OBJ and still keep everything? Thanks for the help.
Prefab File : [Not available anymore]
Prefab File : [Not available anymore]
Last edited by WhiteVN606 on Sat Feb 13, 2021 3:32 pm, edited 1 time in total.
Noob with Questions
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
Where is that "Pet"? Can you give the start address of a vertices point cloud?
(what I find is "pEt", it's not a string but part of a float value, 70 45 74 BF)
(what I find is "pEt", it's not a string but part of a float value, 70 45 74 BF)
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
shakotay2 wrote: ↑Sat Feb 13, 2021 1:31 pmI don't know where it is but that Lion is below the character.Where is that "Pet"? Can you give the start address of a vertices point cloud?I don't know, but that Lion is in the prefab file. And I don't know anything more. I just hope you can help me solve this "Pet" problem.(what I find is "pEt", it's not a string but part of a float value, 70 45 74 BF)
[
Noob with Questions
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
How do you know about that Lion?
Other than the vertex block at 0x602568 (19709 vertices, FVFsize = 12)
all I see is Bi-/Normals, Tangents, compare my rough check from another model:
Other than the vertex block at 0x602568 (19709 vertices, FVFsize = 12)
all I see is Bi-/Normals, Tangents, compare my rough check from another model:
But you may find in MDL__R00469_000069.prefab some other vertices at: 0x49aa87; maybe try different strides.
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
I know that Pet is a "Lion" through a few videos. I don't know where it is, but I see the Texture with it in it.
Noob with Questions
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
Sadly those 13139 vertices at 0x49AA8B don't look like a lion, much worse, they don't look like any pet.
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
- shakotay2
- MEGAVETERAN
- Posts: 4291
- Joined: Fri Apr 20, 2012 9:24 am
- Location: Nexus, searching for Jim Kirk
- Has thanked: 1151 times
- Been thanked: 2244 times
Re: Kamen Rider City Wars Ripped
I can see the lion's head but where's the rest of the beast?
.
.
You do not have the required permissions to view the files attached to this post.
Tuts: a) Bigchillghost, viewtopic.php?f=29&t=17889
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
b) Extracting simple models: http://forum.xentax.com/viewtopic.php?f=29&t=10894
"Quoting the whole thing. Would u ever stop this nonsense?"
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
I don't know, but its whole body looks like it's been transformed by bones (This might be) I came across some videos of the beast's lower body with its belt and legs turned downwards. Here are some pictures of both the beast and the human figure.
You do not have the required permissions to view the files attached to this post.
Noob with Questions
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
I don't think it was due to the lion's skeleton, I think it lost parts of it. And have you found a way to solve that problem?
Noob with Questions
- WhiteVN606
- beginner
- Posts: 25
- Joined: Sun Nov 08, 2020 1:55 pm
- Has thanked: 9 times
- Been thanked: 1 time
Re: Kamen Rider City Wars Ripped
Sorry to bother you again, but I wanted to ask if there is a way to get the animation?
Noob with Questions