no problemdaemon1 wrote:i have too many other games to do. So maybe months later ...DerBlaueKlaus wrote:
ohh ... bad news ... but OK ... maybe a bit later?
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Frostbite model tools (Battlefield, Battlefront and others)
-
- ultra-n00b
- Posts: 8
- Joined: Sun Oct 08, 2017 12:49 pm
- Has thanked: 3 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
It changes quite a bit, for instance, the script you made long time ago to work with SWBF it no longer works to extract everything from the game, lots of assets missing and chunks.daemon1 wrote:must also depend on game version. While I think data folder must not change with updates, but you never know.mono24 wrote:So yeah, its not the same for everyone, it depends what you have bought from Origin.
For example I am kind of late at the "party" and trying to collect all working scripts and maybe if anyone has new ones, that fully work, for Updates as well not just main game files, you never know.
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
This is probably a real dumb question but could somebody help me please, I'm trying to run the fb3decoder and I get this:
How do I install the EASpeex dll?
Code: Select all
XAS1 dll detected.
EASpeex dll not detected.
EALayer3 tool detected.
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Just make sure its copied where the script is, all in same folder.PlasmaUK wrote:This is probably a real dumb question but could somebody help me please, I'm trying to run the fb3decoder and I get this:
How do I install the EASpeex dll?Code: Select all
XAS1 dll detected. EASpeex dll not detected. EALayer3 tool detected.
-
- ultra-n00b
- Posts: 8
- Joined: Wed Nov 29, 2017 3:08 pm
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
I have read the entire fourm. There is no clear set insturctions on how to extract the audio files from star wars battlefront 2 from a noobs point of view.JohnMadden wrote:Please read the thread.Hashbandit wrote:Has anybody managed to extract audio files from the game?
can anybody make a turorial on how to do so please or upload the files to MEGA.
Can you be of any help to me or not?
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
How can I avoid this?
Code: Select all
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.PathTooLongException: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
at System.IO.Path.SafeSetStackPointerValue(Char* buffer, Int32 index, Char value)
at System.IO.Path.NormalizePathFast(String path, Boolean fullCheck)
at System.IO.Path.GetFullPathInternal(String path)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode)
at UFBE.Form1.dumpfile(UInt64 key, String outname)
at UFBE.Form1.bDump_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.8762 (QFE.050727-8700)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
UFBE
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/User/Desktop/UFBE_0_2_1/UFBE.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.8653 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.8770 (QFE.050727-8700)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.8681 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
You do not have the required permissions to view the files attached to this post.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
if path is too long, and you can't shorten your dump directory, there's no way to avoid this other than for me to add a handler to skip such files. Or you can extract these with no folders.mono24 wrote:How can I avoid this?
System.IO.PathTooLongException: The specified path, file name, or both are too long.
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
But it is so strange, it hasn't happen so far, I test/used it for BF1, SWBF1 one time I used it for SWBF2 then few days later wanting to try once more, I got the error, makes no sense.daemon1 wrote:if path is too long, and you can't shorten your dump directory, there's no way to avoid this other than for me to add a handler to skip such files. Or you can extract these with no folders.
On another note, are you planning in near future to support also Updates/Patches and the following games for extraction:
Mirror's Edge Catalyst
Dragon Age Inquisition
Mass Effect Andromeda
Battlefield 3/4/HL
Need for Speed The Run (uses sb/toc only no cas/cat)
Need for Speed Rivals
Need for Speed 2016
Need for Speed Payback
FIFA
then it would truly be a universal frostbite extraction to support them all,
I can supply if you need any files for testing, just saying, you name it.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
it depends on what do you call "near future"mono24 wrote:But it is so strange, it hasn't happen so far, I test/used it for BF1, SWBF1 one time I used it for SWBF2 then few days later wanting to try once more, I got the error, makes no sense.daemon1 wrote:if path is too long, and you can't shorten your dump directory, there's no way to avoid this other than for me to add a handler to skip such files. Or you can extract these with no folders.
On another note, are you planning in near future to support also Updates/Patches and the following games for extraction:
Mirror's Edge Catalyst
Dragon Age Inquisition
Mass Effect Andromeda
Battlefield 3/4/HL
Need for Speed The Run (uses sb/toc only no cas/cat)
Need for Speed Rivals
Need for Speed 2016
Need for Speed Payback
FIFA
then it would truly be a universal frostbite extraction to support them all,
I can supply if you need any files for testing, just saying, you name it.
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Somewhere around or until Christmas of 2018?daemon1 wrote:it depends on what do you call "near future"
No rush, its just sad its limited so far, but I've tested all three functions and its neat, as simple as that.
Yes, BTW, not exporting in folders/subfolders fixes the issue, but damn, what a mess LOL
-
- ultra-n00b
- Posts: 8
- Joined: Wed Nov 29, 2017 3:08 pm
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
HELP HELP HELP I am desperate
3rd post. No help recived. I have read the entire fourum, start to finish, 3 times. WILL LITERALLY PAY SOMEONE FOR HELP
How do i extract the audo files from the game? I have extracted the entire game and now just have a ton of .ebx files and CHUNK files. How do I convert them to audio files or how do i rip audio files from them? I understand there is an audio script for python. I do not understand how to use this script,. in conjuction with python, to rip audio files. Nobody has listed step by step instuctions on how to do so, yet I keep getting told to read the forum post.
Why is it so hard to get some help. Croftys tutorial was usfull for getting the files rippped from the game but the rest of their tutorial was all about textures. I strictly want only audio files.
I am actaully begging for help
3rd post. No help recived. I have read the entire fourum, start to finish, 3 times. WILL LITERALLY PAY SOMEONE FOR HELP
How do i extract the audo files from the game? I have extracted the entire game and now just have a ton of .ebx files and CHUNK files. How do I convert them to audio files or how do i rip audio files from them? I understand there is an audio script for python. I do not understand how to use this script,. in conjuction with python, to rip audio files. Nobody has listed step by step instuctions on how to do so, yet I keep getting told to read the forum post.
Why is it so hard to get some help. Croftys tutorial was usfull for getting the files rippped from the game but the rest of their tutorial was all about textures. I strictly want only audio files.
I am actaully begging for help
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
nobody remember where instructions wereHashbandit wrote:Why is it so hard to get some help
but they were somewhere
i have absolutely no time to look for it
i'm busy making tools
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
no, but maybe after it. Maybe.mono24 wrote:Somewhere around or until Christmas of 2018?
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
DAMN, so that means well have another unfinished tool like others out there all over internet, all alone an abandoned, lol (unless that was sarcasm hehe)daemon1 wrote:no, but maybe after it. Maybe.mono24 wrote:Somewhere around or until Christmas of 2018?
Well. lets see, a step by step you say, ay?Hashbandit wrote:How do i extract the audo files from the game?
-make sure you have python 2.7.3 32bit installed,
-get this audio script converter download/file.php?id=13430
-extract it somewhere you like, and right click on fb3decoder.py and select Edit with IDLE
-IDLE window opens showing you what the script is about,
-now modify the following black/green lines with where you dumped the game data such as the ebx/res/chunks
-first line is where you have dumped the whole game data
Code: Select all
dumpDirectory = r"T:\0research\swbf2"
Code: Select all
targetDirectory = r"T:\0research\swbf2snd"
Code: Select all
ealayer3Path=r"H:\my projects\progs\ealayer3.exe"
Code: Select all
ebxFolder = r"bundles\ebx"
chunkFolder = r"chunks"
chunkFolder2 = r"bundles\chunks"
-now all you have to do is click F5 on your keyboard, click OK to save script if prompted, another window will open showing you the process, and it should go trough all ebx's to convert what ever has audio in it.
have fun
-
- ultra-n00b
- Posts: 8
- Joined: Sun Oct 08, 2017 12:49 pm
- Has thanked: 3 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Hello there ...
got a 'lil problem while extracting BF2 after the season 1 download. Have I made something wrong?
... or will there be an update which supports the season 1 content completely?
got a 'lil problem while extracting BF2 after the season 1 download. Have I made something wrong?
... or will there be an update which supports the season 1 content completely?