I had to delete the program folder, re-extract, pick JUST the DATA folder, and then go through the process again. 0 chunks missing now. Just crashes on me each time.episoder wrote:i gotta dump all before i run this? it does not extract chunks... right?
for clarity:
i used the main folder. latest patch (it's early trial, but patched). it found everything, but 16100 chunks missing. it extracts ebx and 'res' but no chunks. i tried just the data folder too, but same result.
filters tested "iden", "vader", "assault". i dunno if they are in the data or patch folder.
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Frostbite model tools (Battlefield, Battlefront and others)
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
- HeliosAI
- mega-veteran
- Posts: 166
- Joined: Wed Nov 17, 2010 2:57 pm
- Has thanked: 151 times
- Been thanked: 62 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Here's a very ultra thorough tutorial about archive extraction using UFBE: https://sta.sh/02dc32j9pq4 (3. to 7. is the main part)
I hope this is newbie proof, if not tell me and i will change stuff. There's no link references in that specific one because it will be part of this: https://sta.sh/04jxcv9d9o0 , a set of tutorials so really everyone should be able to extract stuff on their own and fix most common problems when using models.
I hope this is newbie proof, if not tell me and i will change stuff. There's no link references in that specific one because it will be part of this: https://sta.sh/04jxcv9d9o0 , a set of tutorials so really everyone should be able to extract stuff on their own and fix most common problems when using models.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Whats the error message on the crash?kschade45 wrote:Just crashes on me each time.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
No you can either dump all, or just files you need. Yes, it extracts chunks. Either all of them, or specific ones.episoder wrote:i gotta dump all before i run this? it does not extract chunks... right?
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
It doesn't give an error message, When trying to dump the full game after about 2 minutes it will stop responding and windows will close it. Worked fine when I only dumped ebx files. I'm running Windows 10 64 bit.daemon1 wrote:Whats the error message on the crash?kschade45 wrote:Just crashes on me each time.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
UFBE 0.2 released!
Changes:
- Support for: Battlefield 1, SWBF1, SWBF2 (alpha, beta and full game)
- chunks will have long lowercase names, so all previous tools will work
- fixed crash if some CAS files are missing
- added resource types for BF1
You need to delete all files from tool folder, otherwise it will crash.
Changes:
- Support for: Battlefield 1, SWBF1, SWBF2 (alpha, beta and full game)
- chunks will have long lowercase names, so all previous tools will work
- fixed crash if some CAS files are missing
- added resource types for BF1
You need to delete all files from tool folder, otherwise it will crash.
You do not have the required permissions to view the files attached to this post.
Last edited by daemon1 on Fri Nov 24, 2017 7:18 pm, edited 1 time in total.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
yes, data. Patch is not supported yeterik945 wrote:Thank you!
Select game or game/data folder?
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Hardware or antivirus problem probably. From the tool's point of view, EBX and chunks are the same, so it can't be any difference extracting them. Also other people were able to fully dump it. Check your system/application logs for errors.kschade45 wrote:It doesn't give an error message, When trying to dump the full game after about 2 minutes it will stop responding and windows will close it. Worked fine when I only dumped ebx files. I'm running Windows 10 64 bit.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
A quick fix (same post above updated)
- chunks will have long lowercase names (so texture tool can find them)
- added resource types for BF1
Now I checked that all my previous mesh tools, texture tool, audio conversion script - all work OK.
- chunks will have long lowercase names (so texture tool can find them)
- added resource types for BF1
Now I checked that all my previous mesh tools, texture tool, audio conversion script - all work OK.
-
- mega-veteran
- Posts: 257
- Joined: Fri Jan 20, 2012 5:43 pm
- Has thanked: 49 times
- Been thanked: 139 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Understood with face_fix.
At me it turned out so (win7)
1. call the command line.
2. Use the cd command to go to the exe folder.
call Fb_SWBF2_faces with the desired vur.
Example
3. Profit!
Otherwise I get "Asset not found in asset banks (2)" error.
May be a problem in determining the location of the exe and assetbank (how do you do this? GetModuleFileName () function?)?
Thanks again for the tools.
At me it turned out so (win7)
1. call the command line.
2. Use the cd command to go to the exe folder.
call Fb_SWBF2_faces with the desired vur.
Example
Code: Select all
J: \ SWBF2u \ 6> Fb_SWBF2_faces J: \ SWBF2u \ 6 \ bundles \ characters \ hero \ hansolo \ hansolo_01 \ vur_hansolo_01.ebx
Otherwise I get "Asset not found in asset banks (2)" error.
May be a problem in determining the location of the exe and assetbank (how do you do this? GetModuleFileName () function?)?
Thanks again for the tools.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
no, i'm searching them in current folder. Which is supposed to be tool folder, if system will not substitute this for your working folder in your "users" foldererik945 wrote: GetModuleFileName () function?)?.
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
sure it is. I corrected ebx2txt for SWBF2. Other games may be different.OrangeC wrote:Is it possible to convert an ebx file to txt in the newer games?
Re: Frostbite model tools (Battlefield 1, Battlefront 1, 2)
Tool works great now, dumped the whole game with no issues. Still having issues with the audio extractor script. Loads the tools and nothing else happens. Is there anything special I need to do or look for?daemon1 wrote:UFBE 0.2 released!
Changes:
- Support for: Battlefield 1, SWBF1, SWBF2 (alpha, beta and full game)
- chunks will have long lowercase names, so all previous tools will work
- fixed crash if some CAS files are missing
- added resource types for BF1
You need to delete all files from tool folder, otherwise it will crash.