Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Dead Rising 4 model import maxscript (.mdl .tex)
- Crazy31139
- veteran
- Posts: 121
- Joined: Fri Dec 02, 2016 5:53 pm
- Has thanked: 324 times
- Been thanked: 63 times
- Contact:
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Привет у меня проблемы модель cast07a.mdl (Dead Rising 4\data\models\npcs) скрипт загружает не полностью модель, так же и модель cast13.mdl
А у модели cast10b.mdl у волос и ресниц поврежденны
https://1drv.ms/u/s!Amg1SaLumVp4tVGiuJymSKQ_NQ0n
А у модели cast10b.mdl у волос и ресниц поврежденны
https://1drv.ms/u/s!Amg1SaLumVp4tVGiuJymSKQ_NQ0n
- zaramot
- double-veteran
- Posts: 783
- Joined: Wed Jan 05, 2011 12:41 pm
- Has thanked: 39 times
- Been thanked: 855 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Okay, I have an update. Script should import uv's now. The problem was because of two uv's lareys. Though, I might fixed it for all of models, but still there's a chance, that I didn't. I fixed 2 of 7 types, since I don't know for sure if others 5 using same method too. I think it's not the happy end xD
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
You do not have the required permissions to view the files attached to this post.
Last edited by zaramot on Mon Nov 20, 2017 8:31 pm, edited 1 time in total.
Making model-import scripts, PM
-
- veteran
- Posts: 146
- Joined: Fri Sep 17, 2010 7:44 am
- Has thanked: 20 times
- Been thanked: 21 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
zaramot wrote:Okay, I have an update. Script should import uv's now. The problem was because of two uv's lareys. Though, I might fixed it for all of models, but still there's a chance, that I didn't. I fixed 2 of 7 types, since I don't know for sure if others 5 using same method too. I think it's not the happy end xD
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
sorry why i have to deal with channels? A script is supposed to do all the job
- Tosyk
- double-veteran
- Posts: 1027
- Joined: Thu Oct 22, 2009 10:24 am
- Location: Russia, Siberia
- Has thanked: 269 times
- Been thanked: 154 times
- Contact:
Re: Dead Rising 4 model import maxscript (.mdl .tex)
script is open sourced — you are welcome to add any feature you want.fil1969 wrote:sorry why i have to deal with channels? A script is supposed to do all the jobzaramot wrote:Okay, I have an update. Script should import uv's now. The problem was because of two uv's lareys. Though, I might fixed it for all of models, but still there's a chance, that I didn't. I fixed 2 of 7 types, since I don't know for sure if others 5 using same method too. I think it's not the happy end xD
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
-
- veteran
- Posts: 146
- Joined: Fri Sep 17, 2010 7:44 am
- Has thanked: 20 times
- Been thanked: 21 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
if i have the skills i will make a my tool! what shitty answer is thi!s!|!! If someone released a tool is supposed he emprove it.. otherwhise every one can do it..Tosyk wrote:script is open sourced — you are welcome to add any feature you want.fil1969 wrote:sorry why i have to deal with channels? A script is supposed to do all the jobzaramot wrote:Okay, I have an update. Script should import uv's now. The problem was because of two uv's lareys. Though, I might fixed it for all of models, but still there's a chance, that I didn't. I fixed 2 of 7 types, since I don't know for sure if others 5 using same method too. I think it's not the happy end xD
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
-
- veteran
- Posts: 146
- Joined: Fri Sep 17, 2010 7:44 am
- Has thanked: 20 times
- Been thanked: 21 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Is awesome now! Thank you very much for the update!!!!!zaramot wrote:Okay, I have an update. Script should import uv's now. The problem was because of two uv's lareys. Though, I might fixed it for all of models, but still there's a chance, that I didn't. I fixed 2 of 7 types, since I don't know for sure if others 5 using same method too. I think it's not the happy end xD
If any part of rigged meshes would have "broken" uv's. Do this simple procedure:
Select the model and add the "Unwrap UVW" modifier above it and then press "Edit" button
Change the channel from 1 to 2 and press the button "Reset UVWs", when prompted, press Yes.
This will display the second texture coordinates set. Second Uv's channel
P.S. As about missing parts, not sure that script is skipping something, maybe these characters using parts from other models? Maybe there are some default ones. I checked, and there no extra data for import.
- Tosyk
- double-veteran
- Posts: 1027
- Joined: Thu Oct 22, 2009 10:24 am
- Location: Russia, Siberia
- Has thanked: 269 times
- Been thanked: 154 times
- Contact:
Re: Dead Rising 4 model import maxscript (.mdl .tex)
no one supposed to do anything by you wish, show some respect to person who contributed — he spent his time using his skills for your fun. be wise in your words and patient.fil1969 wrote:If someone released a tool is supposed he emprove it..
-
- veteran
- Posts: 146
- Joined: Fri Sep 17, 2010 7:44 am
- Has thanked: 20 times
- Been thanked: 21 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
i respect him a lot ( read my comments) i don't respect people like you who wants to be a professor!Tosyk wrote:no one supposed to do anything by you wish, show some respect to person who contributed — he spent his time using his skills for your fun. be wise in your words and patient.fil1969 wrote:If someone released a tool is supposed he emprove it..
- Crazy31139
- veteran
- Posts: 121
- Joined: Fri Dec 02, 2016 5:53 pm
- Has thanked: 324 times
- Been thanked: 63 times
- Contact:
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Привет у меня проблемы с моделью classic_frank_npc.mdl при импорте в 3d max кости ног не работают
Ссылка на модель если нужно - https://1drv.ms/u/s!Amg1SaLumVp4tVLg-rHXnG4B3D-7
Ссылка на модель если нужно - https://1drv.ms/u/s!Amg1SaLumVp4tVLg-rHXnG4B3D-7
- Tosyk
- double-veteran
- Posts: 1027
- Joined: Thu Oct 22, 2009 10:24 am
- Location: Russia, Siberia
- Has thanked: 269 times
- Been thanked: 154 times
- Contact:
Re: Dead Rising 4 model import maxscript (.mdl .tex)
okay, just don't cry — no one need your tears.fil1969 wrote:i respect him a lot ( read my comments) i don't respect people like you who wants to be a professor!Tosyk wrote:no one supposed to do anything by you wish, show some respect to person who contributed — he spent his time using his skills for your fun. be wise in your words and patient.fil1969 wrote:If someone released a tool is supposed he emprove it..
- zaramot
- double-veteran
- Posts: 783
- Joined: Wed Jan 05, 2011 12:41 pm
- Has thanked: 39 times
- Been thanked: 855 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Here's updated version for your Frank model, should work fine. Also, here's a video, smal tutorial how to restore uv's when they arern't correct or missing.
https://www.youtube.com/watch?v=YzKvKea ... e=youtu.be
https://www.youtube.com/watch?v=YzKvKea ... e=youtu.be
You do not have the required permissions to view the files attached to this post.
Making model-import scripts, PM
-
- n00b
- Posts: 11
- Joined: Sun Oct 19, 2014 5:15 am
- Location: Ontario, Canada
- Has thanked: 5 times
Re: Dead Rising 4 model import maxscript (.mdl .tex)
Thank you so much for this zaramot, the script is awesome! I really appreciate your time
By the way, about the classic Frank model not working (above), I have found there are inherent problems with some of the models themselves. Some are not skinned properly (in-game), some models use multiple instances of the same mesh (my guess would be because one may have default textures, another may have special glossiness/tinting/specular etc, it's a pretty hack way by CV to get some effects to look good, but it's a huge memory hog), and some are incomplete.
The legs not working may be Capcom's fault, especially if it's not officially in game yet
By the way, about the classic Frank model not working (above), I have found there are inherent problems with some of the models themselves. Some are not skinned properly (in-game), some models use multiple instances of the same mesh (my guess would be because one may have default textures, another may have special glossiness/tinting/specular etc, it's a pretty hack way by CV to get some effects to look good, but it's a huge memory hog), and some are incomplete.
The legs not working may be Capcom's fault, especially if it's not officially in game yet