Just wanna say big thanks to all guys who made it possible!
Game: GTR Evolution
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Forza Motorsport Resource Extraction (.carbin)
-
- ultra-n00b
- Posts: 5
- Joined: Mon Apr 12, 2010 1:31 pm
- Location: salim3d.blogspot.com/
- Has thanked: 5 times
- Contact:
Re: Forza Motorsport Resource Extraction (.carbin)
hello !
thx for this great tool brothers !
i just have a question,and i hope it's not off-topic : i've heared that Forza 2 got also .carbin is it possible to get those models too using the Forza Studio ?
thanks a lot and sorry if i bother !
cheers,
Salim Ljabli
thx for this great tool brothers !
i just have a question,and i hope it's not off-topic : i've heared that Forza 2 got also .carbin is it possible to get those models too using the Forza Studio ?
thanks a lot and sorry if i bother !
cheers,
Salim Ljabli
-
- ultra-n00b
- Posts: 4
- Joined: Fri May 21, 2010 10:07 pm
Re: Forza Motorsport Resource Extraction (.carbin)
Hi, I join the question raised above, it would not be bad, do support importing models from Forza Motorsport 2, thank you for a great program!
-
- beginner
- Posts: 38
- Joined: Sat Dec 19, 2009 6:34 pm
- Has thanked: 10 times
- Been thanked: 4 times
Re: Forza Motorsport Resource Extraction (.carbin)
thanks to everyone who helped with forza studio, and most of all thank you ernegien, really great work
audi s4 in gta4:eflc, converted with latest zm2
audi s4 in gta4:eflc, converted with latest zm2
- Ernegien
- mega-veteran
- Posts: 160
- Joined: Wed Mar 24, 2010 6:27 am
- Location: Illinois, USA
- Has thanked: 12 times
- Been thanked: 158 times
- Contact:
Re: Forza Motorsport Resource Extraction (.carbin)
The most recent source already includes code to completely parse through Forza 2 carbin files, I just haven't gotten around to looking into how the subpart indices reference the two chunks of vertex data...gpktm wrote:Ofcourse, everyone wants Forza2 files. I inlcude my self also.
From what I've read in page 26, Ernegien is working on it.
-
- ultra-n00b
- Posts: 4
- Joined: Fri May 21, 2010 10:07 pm
Re: Forza Motorsport Resource Extraction (.carbin)
I have about the sponsored project, if there is no difficulty with payment, I'm just out of Russia.
Re: Forza Motorsport Resource Extraction (.carbin)
Hi Ernegien,
Forza Studio is coming along leaps and bounds. I had some initial noob problems but soon got over those. Everything is now working well butI have a request and I think it would be a five second fix for you (based on how quickly you rattled out the initial versions!)
.MTL files!!
I've attached a file that shows how an OBJ with MTL associated with it is different to the current OBJ.
In essence rather than it list:-
V entries
VT entries
VN entries
G (group?) reference line which lists the part name.
F entries for that part
G New part name
F entries ........ and so on.
you now get:-
mtllib material.mtl (reference the mtl file to be used)
G part name
V entries for just that part
VT entries for just that part
VN enries for just that part
usemtl materialname (taken from the MTL file)
F entries for just that part
G group (for next part)...... and the list continues as before........
The MTL file needs to just list
newmtl NAME (should be taken from the G part references)
Kd 1 1 1 (just sets the diffuse colour to white - can be this for everything)
I figured if you scanned the list of G references in your OBJ you could create an MTL and then (re)write the OBJ in the new order.
This would be amazing if you can add it in as for us 'renderers' out there its the icing on the cake to speed up conversion.
Let me know if you need any more info on MTL or OBJ structure but I think its all covered in the attachement.
Fingers crossed!
Forza Studio is coming along leaps and bounds. I had some initial noob problems but soon got over those. Everything is now working well butI have a request and I think it would be a five second fix for you (based on how quickly you rattled out the initial versions!)
.MTL files!!
I've attached a file that shows how an OBJ with MTL associated with it is different to the current OBJ.
In essence rather than it list:-
V entries
VT entries
VN entries
G (group?) reference line which lists the part name.
F entries for that part
G New part name
F entries ........ and so on.
you now get:-
mtllib material.mtl (reference the mtl file to be used)
G part name
V entries for just that part
VT entries for just that part
VN enries for just that part
usemtl materialname (taken from the MTL file)
F entries for just that part
G group (for next part)...... and the list continues as before........
The MTL file needs to just list
newmtl NAME (should be taken from the G part references)
Kd 1 1 1 (just sets the diffuse colour to white - can be this for everything)
I figured if you scanned the list of G references in your OBJ you could create an MTL and then (re)write the OBJ in the new order.
This would be amazing if you can add it in as for us 'renderers' out there its the icing on the cake to speed up conversion.
Let me know if you need any more info on MTL or OBJ structure but I think its all covered in the attachement.
Fingers crossed!
You do not have the required permissions to view the files attached to this post.
-
- veteran
- Posts: 109
- Joined: Thu May 13, 2010 12:35 am
- Has thanked: 5 times
- Been thanked: 16 times
Re: Forza Motorsport Resource Extraction (.carbin)
Awww dude !! thats awsome. finally MTL creation this will make texturing the cars a lot quicker. Nice one Cheers
Yes! i know that's what i said... But its not what i meant.
Re: Forza Motorsport Resource Extraction (.carbin)
Nice one Ernegien,
Many thanks for this.
EDIT: just spotted a minor thing.
Can you change the export line for the next update to:-
// export faces
sw.WriteLine("usemtl {0}", piece.Parent.Name + "_" + piece.Name); - I think this is right but i'm not an Xna developer!
and I guess the MTL export bit will need tweaking as well. If we put the part name before the surface name it will help when bringing the cockpit and car models together. because we have some matching surfaces, there can sometimes be an issue as to which one gets to stay!
Many thanks for this.
EDIT: just spotted a minor thing.
Can you change the export line for the next update to:-
// export faces
sw.WriteLine("usemtl {0}", piece.Parent.Name + "_" + piece.Name); - I think this is right but i'm not an Xna developer!
and I guess the MTL export bit will need tweaking as well. If we put the part name before the surface name it will help when bringing the cockpit and car models together. because we have some matching surfaces, there can sometimes be an issue as to which one gets to stay!
Last edited by prefim on Mon May 24, 2010 10:25 am, edited 1 time in total.
Re: Forza Motorsport Resource Extraction (.carbin)
hmm...Don't work New Version too
Please release a version of bugs fixed!
I and some people can't use Forza Studio
and we want to use Forza Studio ><
Thanks
Please release a version of bugs fixed!
I and some people can't use Forza Studio
and we want to use Forza Studio ><
Thanks