This is actually stated in the very first message in the first page!Sideromelane wrote: ↑Tue Jan 11, 2022 10:17 pm But also i just found a 'fix' for this exact issue!
Run the horizon.exe withOUT DLC1.bin or Patch.bin. One of those two is crashing the tool.
Important information: this site is currently scheduled to go offline indefinitely by end of the year.
Horizon Zero Dawn
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Horizon Zero Dawn
-
- n00b
- Posts: 13
- Joined: Sun Jan 16, 2022 3:46 pm
- Has thanked: 7 times
- Been thanked: 1 time
Re: Horizon Zero Dawn
How to use the horizon.exe tool step by step and extract 3d models from horizon zero dawn video tutorial:-
https://youtu.be/9p7u8Bo-Noc
https://youtu.be/9p7u8Bo-Noc
Last edited by player12341 on Sun Feb 13, 2022 8:28 am, edited 1 time in total.
-
- ultra-n00b
- Posts: 1
- Joined: Sat Jan 22, 2022 6:31 pm
Re: Horizon Zero Dawn
Windows blocks the download...daemon1 wrote: ↑Wed Sep 30, 2020 7:11 am Ok here's PC tool.
Usage is same as PS4. Someone said it doesnt work with oodle5, so i made it with oodle7, even though i think you can use other verisons renaming the .DLL as usual.
I checked a few models, textures and animations, they all look exactly same as on PS4. No quality difference.
So I dont know why files are 10GB bigger.
If anything will not work, let me know.
-
- n00b
- Posts: 13
- Joined: Sun Jan 16, 2022 3:46 pm
- Has thanked: 7 times
- Been thanked: 1 time
Re: Horizon Zero Dawn
turn off your windows antivirus for a bit as the tool downloads and then use the tool correctly by following video tutorial:-Fattishman wrote: ↑Sat Jan 22, 2022 6:39 pmWindows blocks the download...daemon1 wrote: ↑Wed Sep 30, 2020 7:11 am Ok here's PC tool.
Usage is same as PS4. Someone said it doesnt work with oodle5, so i made it with oodle7, even though i think you can use other verisons renaming the .DLL as usual.
I checked a few models, textures and animations, they all look exactly same as on PS4. No quality difference.
So I dont know why files are 10GB bigger.
If anything will not work, let me know.
https://youtu.be/9p7u8Bo-Noc
Re: Horizon Zero Dawn
animation_managers\characters\humanoids\player\female\anim
export animation error It's all messed up Can you help me see?
export animation error It's all messed up Can you help me see?
You do not have the required permissions to view the files attached to this post.
-
- n00b
- Posts: 13
- Joined: Sun Jan 16, 2022 3:46 pm
- Has thanked: 7 times
- Been thanked: 1 time
Re: Horizon Zero Dawn
HI GUYS THIS IS THE VIDEO TUTORIAL ON HOW TO CORRECTLY EXTRACT ANIMATIONS FROM HORIZON ZERO DAWN USING THE TOOL:
https://youtu.be/kaKdZ_YbH5I
https://youtu.be/kaKdZ_YbH5I
-
- n00b
- Posts: 13
- Joined: Sun Jan 16, 2022 3:46 pm
- Has thanked: 7 times
- Been thanked: 1 time
Re: Horizon Zero Dawn
-
- double-veteran
- Posts: 840
- Joined: Sat Nov 06, 2010 12:27 am
- Has thanked: 436 times
- Been thanked: 235 times
Re: Horizon Zero Dawn
You don't need to double post for that, one post would have been enough even if it was in response to the user in need.player12341 wrote: ↑Sun Feb 13, 2022 8:25 am...follow this video to correctly export animation from horizon zero dawn ...
Also you could have simplified this a bit and make a batch file ".bat" using notepad, to speed things up if you want to
Code: Select all
for %%a in (*.core) do Horizon_pc.exe "%%a"
then paste this and run also as a batch:
Code: Select all
for %a in (*.core) do Horizon.exe "%a"
Re: Horizon Zero Dawn
Hi everyone! I was wondering if there is a chance we could get the source code of the horizon tool? I am not interested in the textures of the game but rather in the code of the game itself, specifically the way it generates modification boxes in shops or the way modifications and modification boxes work in general. I have extracted the .core files necessary but now I can't view them because the tool only extracts the files that are tied to the textures and now I'm stuck. Thank you daemon1 for making this tool and hope anyone can help me out. Cheers!
-
- ultra-n00b
- Posts: 1
- Joined: Mon Jan 10, 2022 6:58 pm
Re: Horizon Zero Dawn
Howdy, forum lurker here. Stumbled upon this tool a couple of months ago with the goal of generating 3D-printable meshes for personal use, ideally in poses according to exciting "action stances" from animation files.
I've worked via trial & error through everything up to just after daemon's Step 4:
Running the a.bat file updates the mesh_skeleton_rootbone.core.ascii and .smd files. I am now confused by the following directions:
What is meant by
Next, I assume the SMD merging is the same as for simple animal models, in that we'll copy the text from mesh_skeleton_rootbone.core.smd and paste it to the beginning of a combined mesh smd file, being sure to delete "version 1" and "nodes". Will that combined mesh file also be a merger of all 25 part's SMD files, or do any other problematic lines need to be deleted too?
If I can accomplish this much, will that final combined SMD file display correctly as a complete model in Noesis--body, removable parts, and skeleton? Does the program somehow distinguish between the core body and removable parts as seen in Daemon1's video https://www.youtube.com/watch?v=rsbwOuqor3c? or will it interpret it as one mesh piece?
Lastly, why does the ascii file need to be merged if we're only opening an smd file for exporting a mesh model?
-----------------------------------
Appreciate all of the work you all have done. Glad to see some friendly, repeating helpers on here too. I don't have any programming experience, but I work with technical writing and have written up detailed directions for how I've gotten this far. If I can accomplish these last conversion steps and then figure out animation extraction, I'd be happy to share my SOP with the forum. Perhaps it would help solve the most common "stuck. Help!?" questions.
Cheers y'all!
I've worked via trial & error through everything up to just after daemon's Step 4:
I'm working with the horse/Strider model right now and have a folder full of extracted ascii and smd files for the body part, 24 "plate/eye" parts, and the canister_fuel part. I've also successfully generated the a.bat and mesh_skeleton_rootbone.core.ascii and mesh_skeleton_rootbone.core.smd files from Step 3--they have nonzero file sizes. I replaced "_helper" strings with ".core" for all 24 items listed in the a.bat file, as in Step 4. Note that the fuel canister is missing from the a.bat list. How does that get placed and weighted to the model?daemon1 wrote: ↑Mon Feb 19, 2018 9:33 pm
step 4:
Open A.BAT file, and replace all "_helper" strings with ".core". This probably could be done automatically on export, but the thing is, I'm not sure all helper bones will always be called the same as helper MESHES. So I'm leaving this to the users at least for now.
Run this .BAT file.
Running the a.bat file updates the mesh_skeleton_rootbone.core.ascii and .smd files. I am now confused by the following directions:
Which ASCII files are getting merged, and should the combined file still be another ASCII file (or is just .txt okay)? Are the prior 25 part's ASCIIs just merged e.g., by using "copy [A]+[ B]+[C] [outputABC]" in the command prompt? Does the entire content of the mesh_skeleton_rootbone.core.ascii file get pasted to the beginning of this new merged file? Do any lines need to be deleted like we did when combining the mesh and skeleton smd files from a simple animal model?daemon1 wrote: ↑Mon Feb 19, 2018 9:33 pm
to load all destructible parts as one file:
========================================================
Merge all ASCII files into one as text file, then copypaste skeleton into it.
Then count submeshes (it will correspond to number of "material" string)
and put a number of submeshes after the skeleton (before all the actual data).
This number will correspond to number of "material" string in all files.
Same for SMD files, just no need to count submeshes.
What is meant by
I count the string "material" 31 times if I merge ASCIIs and paste the mesh_skeleton_rootbone.core.ascii text to a combined file as I asked about above. What is the exact text I need to enter after the text copied from the mesh_skeleton_rootbone.core.ascii file to represent this 31 submesh number?
Next, I assume the SMD merging is the same as for simple animal models, in that we'll copy the text from mesh_skeleton_rootbone.core.smd and paste it to the beginning of a combined mesh smd file, being sure to delete "version 1" and "nodes". Will that combined mesh file also be a merger of all 25 part's SMD files, or do any other problematic lines need to be deleted too?
If I can accomplish this much, will that final combined SMD file display correctly as a complete model in Noesis--body, removable parts, and skeleton? Does the program somehow distinguish between the core body and removable parts as seen in Daemon1's video https://www.youtube.com/watch?v=rsbwOuqor3c? or will it interpret it as one mesh piece?
Lastly, why does the ascii file need to be merged if we're only opening an smd file for exporting a mesh model?
-----------------------------------
Appreciate all of the work you all have done. Glad to see some friendly, repeating helpers on here too. I don't have any programming experience, but I work with technical writing and have written up detailed directions for how I've gotten this far. If I can accomplish these last conversion steps and then figure out animation extraction, I'd be happy to share my SOP with the forum. Perhaps it would help solve the most common "stuck. Help!?" questions.
Cheers y'all!
Re: Horizon Zero Dawn
That would be great, I am stuck after extracting the models, also there are a lot of robots wuth no mesh_skeleton_rootbone and only have skeleton_rootbone, already managed to import the mesh files to blender, but the destructible ones dont import at the desired location but at the origin (0,0). any help would be greatHowdyNeighbor wrote: ↑Sun Feb 13, 2022 11:52 pm Howdy, forum lurker here. Stumbled upon this tool a couple of months ago with the goal of generating 3D-printable meshes for personal use, ideally in poses according to exciting "action stances" from animation files.
I've worked via trial & error through everything up to just after daemon's Step 4:
I'm working with the horse/Strider model right now and have a folder full of extracted ascii and smd files for the body part, 24 "plate/eye" parts, and the canister_fuel part. I've also successfully generated the a.bat and mesh_skeleton_rootbone.core.ascii and mesh_skeleton_rootbone.core.smd files from Step 3--they have nonzero file sizes. I replaced "_helper" strings with ".core" for all 24 items listed in the a.bat file, as in Step 4. Note that the fuel canister is missing from the a.bat list. How does that get placed and weighted to the model?daemon1 wrote: ↑Mon Feb 19, 2018 9:33 pm
step 4:
Open A.BAT file, and replace all "_helper" strings with ".core". This probably could be done automatically on export, but the thing is, I'm not sure all helper bones will always be called the same as helper MESHES. So I'm leaving this to the users at least for now.
Run this .BAT file.
Running the a.bat file updates the mesh_skeleton_rootbone.core.ascii and .smd files. I am now confused by the following directions:
Which ASCII files are getting merged, and should the combined file still be another ASCII file (or is just .txt okay)? Are the prior 25 part's ASCIIs just merged e.g., by using "copy [A]+[ B]+[C] [outputABC]" in the command prompt? Does the entire content of the mesh_skeleton_rootbone.core.ascii file get pasted to the beginning of this new merged file? Do any lines need to be deleted like we did when combining the mesh and skeleton smd files from a simple animal model?daemon1 wrote: ↑Mon Feb 19, 2018 9:33 pm
to load all destructible parts as one file:
========================================================
Merge all ASCII files into one as text file, then copypaste skeleton into it.
Then count submeshes (it will correspond to number of "material" string)
and put a number of submeshes after the skeleton (before all the actual data).
This number will correspond to number of "material" string in all files.
Same for SMD files, just no need to count submeshes.
What is meant byI count the string "material" 31 times if I merge ASCIIs and paste the mesh_skeleton_rootbone.core.ascii text to a combined file as I asked about above. What is the exact text I need to enter after the text copied from the mesh_skeleton_rootbone.core.ascii file to represent this 31 submesh number?
Next, I assume the SMD merging is the same as for simple animal models, in that we'll copy the text from mesh_skeleton_rootbone.core.smd and paste it to the beginning of a combined mesh smd file, being sure to delete "version 1" and "nodes". Will that combined mesh file also be a merger of all 25 part's SMD files, or do any other problematic lines need to be deleted too?
If I can accomplish this much, will that final combined SMD file display correctly as a complete model in Noesis--body, removable parts, and skeleton? Does the program somehow distinguish between the core body and removable parts as seen in Daemon1's video https://www.youtube.com/watch?v=rsbwOuqor3c? or will it interpret it as one mesh piece?
Lastly, why does the ascii file need to be merged if we're only opening an smd file for exporting a mesh model?
-----------------------------------
Appreciate all of the work you all have done. Glad to see some friendly, repeating helpers on here too. I don't have any programming experience, but I work with technical writing and have written up detailed directions for how I've gotten this far. If I can accomplish these last conversion steps and then figure out animation extraction, I'd be happy to share my SOP with the forum. Perhaps it would help solve the most common "stuck. Help!?" questions.
Cheers y'all!
-
- MEGAVETERAN
- Posts: 2647
- Joined: Tue Mar 24, 2015 8:12 pm
- Has thanked: 65 times
- Been thanked: 2871 times
Re: Horizon Zero Dawn
when i said that "half of robots have 2 skeleton files", i meant IF a robot has 2 skeleton files, THEN you need to use mesh_skeleton_rootbone.
If robot has only one skeleton, that one is ok to use with the tool.
-
- ultra-n00b
- Posts: 6
- Joined: Sat Feb 06, 2021 5:24 am
- Has thanked: 5 times
Re: Horizon Zero Dawn
hello and extracted the raptor model
but only the files
body.core_0.smd AND antennas.core_0.smd
they open me
in their correct coordinates
all the rest of the list appears in the center of the model out of its original place and without a skeleton... as if it were a foreign model...
can someone help me to solve this problem?
how I do this? someone help me?
https://www.youtube.com/watch?v=rsbwOuqor3c
I have managed to extract models and textures using these guides
extract models
https://www.youtube.com/watch?v=9p7u8Bo-Noc
extract animations
https://www.youtube.com/watch?v=kaKdZ_YbH5I
Everything in the guides went well... or not?
I can't understand how
bring the armor parts to their actual position
Can someone give me a clearer guide?
I'm ultra noob...
I tried to follow this guide
viewtopic.php?f=16&t=17726
the final steps explains how
but I can't get it right.
to which file do I change from _helper to .core?
How or when is the a.bat file created?
I'm using blender latest version with the tool to import smd in its latest version... will that be a problem?
thank you all for your valuable help
but only the files
body.core_0.smd AND antennas.core_0.smd
they open me
in their correct coordinates
all the rest of the list appears in the center of the model out of its original place and without a skeleton... as if it were a foreign model...
can someone help me to solve this problem?
how I do this? someone help me?
https://www.youtube.com/watch?v=rsbwOuqor3c
I have managed to extract models and textures using these guides
extract models
https://www.youtube.com/watch?v=9p7u8Bo-Noc
extract animations
https://www.youtube.com/watch?v=kaKdZ_YbH5I
Everything in the guides went well... or not?
I can't understand how
bring the armor parts to their actual position
Can someone give me a clearer guide?
I'm ultra noob...
I tried to follow this guide
viewtopic.php?f=16&t=17726
the final steps explains how
but I can't get it right.
to which file do I change from _helper to .core?
How or when is the a.bat file created?
I'm using blender latest version with the tool to import smd in its latest version... will that be a problem?
thank you all for your valuable help
-
- ultra-n00b
- Posts: 6
- Joined: Sat Feb 06, 2021 5:24 am
- Has thanked: 5 times
Re: Horizon Zero Dawn
well, if you already bought it on steam you could try using the tool just to see if it works... who knows maybe we'll get lucky and if it works
if it doesn't work we'll have to wait to see if daemon1 surprises us with another tool.
if it doesn't work we'll have to wait to see if daemon1 surprises us with another tool.